Taking Care of Your Brick Tiles

Posted by Trailblaze Media on

Taking Care of Your Brick Tiles

Brick tiles are made from either ceramic or porcelain and to ensure that they continue to look their best, you should make sure that you spend time looking after them. Whether you have opted for the traditional-looking New York Rustic Brick Red Effect Wall Tile or something modern like the Charcoal Smooth Brick Effect Tile, you want to make sure they always look as good as possible. So, once you have found brick tiles near me and had them installed, you can follow these steps to ensure that your room and walls always look super-smart.


Avoid Chemical Cleaners

While it might seem tempting to turn to chemical cleaners that promise to bring your tiles up like new, it’s recommended that you avoid products that contain the likes of Ammonia, Bleach or Acids. Brick tiles are made in a way that makes them water-resistant but if you choose to use corrosive chemicals then you are going to erode the tile as well as the grout.

To clean the tiles daily, then all you’ll need is warm water but for a deeper clean every couple of weeks you can use a mild detergent with warm water.


Remove Detergents Completely

You have to make sure that the detergent you use has a low concentration. Once you have your detergent, apply it to the tiles and let it work for five minutes. You can then use a damp cloth to remove the detergent but always make sure that you don’t let it dry before removing it. Once you have removed the detergent with a damp cloth, get yourself another damp cloth and then remove any remaining residue to prevent water spots.


Removing Stains

Every stain is different yet most of us to turn to the same stain-removal methods but there is more to it than this. Whether it is a splash of red wine or the splattering of food, it’s really important that you take the right approach when cleaning stains. Try using warm water first and where required, attempt using some stain removal products but don’t cover the entire tile and only focus on the stain itself.


Use Gentle Chemicals to Remove Stains

Some stains are more stubborn than others and require more effort to remove. So, if you have tried the steps above to clean your tiles and remove stains then you might need to take a more aggressive approach whereby chemicals are used. However, you need to make sure that you use gentle chemicals to ensure you avoid damaging the tiles but remember that chemical can alter the colour of the grout. The aim is to gently apply it and work it into the stain slowly before removing it with a damp cloth.


Cleaning the Tile Joints

The tile joints can also become a problem area because of a build up of dirt and grime. Of course, it’s great having sparkling tiles but if they are paired up with dirty grout then they won’t look their best. So, if you want to clean the grout with a gentle detergent using a toothbrush as this will enable you to get into the joints. Don’t be too aggressive but ensure you work the detergent into any dirt before removing the detergent with a damp cloth.

Your brick tiles will be the focal point of your room so naturally, you want them to look as good as possible. With the right care and attention, you’ll find it’s possible to keep them looking their best.